Crank pins

E10451 2T 3T 4T Crankpin std (+0.001")

E10451 2T 3T 4T Crankpin std (+0.001")

Crank pin 0.800" diameter. + 0.001" up on standard. Ideal fit to press back up tight. These pins will often sort out cranks with slight...
£42.00
Add:
10450
E10452 2T 3T 4T crank center shaft

E10452 2T 3T 4T crank center shaft

Crank center pin for 2T 3T 4T. 0.001" oversize to ensure a tight fit again. Straight replacement for E8399.
£42.00
Add:
10452
E374 Pre war crank pin

E374 Pre war crank pin

Brand new crank pin 0.002" oversize on bearing surface to take up slack in worn con rods. And 0.001" oversize where it presses in to crank...
£60.00
Add:
374
E7116 6E 7E 8E 2L crank pin standard (.7998")

E7116 6E 7E 8E 2L crank pin standard (.7998")

Standard size cank pin to suit 6E 7E 8E 2L engines.
£42.00
Add:
7116
E7166/800 6E 7E 8E 2L crank pin oversize (.800")

E7166/800 6E 7E 8E 2L crank pin oversize (.800")

Crank pin to suit 6E 7E 8E 2L engines. THis pin is .800" so it's ideal for reconditioning cranks with a small amount of play.
£42.00
Add:
7116/800
E9691 Crankpin standard ( +0.001") for 9E - 37A

E9691 Crankpin standard ( +0.001") for 9E - 37A

Crank pin 0.800" diameter. + 0.001" up on standard. Ideal fit to press back up tight. These pins will often sort out cranks with slight...
£42.00
Add:
9691
Copyright © 2020 Villiers Services. Website by PPSH