Villiers Service Tools

5/32 Bsw Tap (Fits Contact Breaker Cover Screws)

5/32 Bsw Tap (Fits Contact Breaker Cover Screws)

5/32 Bsw tap. Used in many applications, but verry usefull for cleaning or re cutting treads on the points cover screw holes. Taps holes for 9570...
£4.95 Ex VAT
Add:
9/16 x 20 TPI Die (Flyheel size)

9/16 x 20 TPI Die (Flyheel size)

Perfect for cleaning up damaged flywheel side crank threads on nearly all Villiers motors. Also same thread used on many wheel spindles. When...
£11.00 Ex VAT
Add:
9/16 x 20 TPI Tap (Flywheel Nut Size)

9/16 x 20 TPI Tap (Flywheel Nut Size)

Perfect for cleaning out threads in Villiers flywheels and also its also used on many wheel nuts etc. usually its due to a poor thread, one pass with...
£11.00 Ex VAT
Add:
C9362 Clutch Cap Tool (Peg Spanner)

C9362 Clutch Cap Tool (Peg Spanner)

Peg spanner used for the removal of the 11029 clutch cap nut. This particular version bolts onto cap so there is no chance at all of it slipping out.
£9.00 Ex VAT
Add:
Clutch Hub Locking Tool (Villiers Late Type Clutch)

Clutch Hub Locking Tool (Villiers Late Type Clutch)

Villiers clutch hub holding tool. Locks the hub off to the basket to allow easy removall of centre nut. Fitted to:  2L,3L, 31C, 9E, 10E,...
£6.50 Ex VAT
Add:
Clutch Locking Comb (Twins + 1H)

Clutch Locking Comb (Twins + 1H)

Very useful tool, this locks the primary sprocket and clutch chainwheel. You can then undo engine sprocket nut and clutch with minimal effort. This...
£6.00 Ex VAT
Add:
Clutch Locking Comb 9E - 32A - 37A

Clutch Locking Comb 9E - 32A - 37A

Clutch locking comb, fits all 9E / 10E / 11E / 31A/ 32A/ 33A/ 34A/ 35A/ 36A/ 37A motors. Very useful tool, locks whole transmission whilst you work...
£6.50 Ex VAT
Add:
Exhaust 'C' Spanner (1 3/4 Pipes)

Exhaust 'C' Spanner (1 3/4 Pipes)

Genuine, original Villiers exhast spanner. Stops you rounding off fins and with the correct spanner you can get the exhaust nut much tighter, which...
£6.00 Ex VAT
Add:
Hammer Tight Spanner

Hammer Tight Spanner

Hammer tight spanner to fit nearly all post war motors. A very useful tool for tightening and loosening flywheels. Also it can be used in conjunction...
£12.00 Ex VAT
Add:
Motoplat Flywheel Tool

Motoplat Flywheel Tool

Flywheel extractor to fit motoplat systems, as fitted to Villiers competition motors and Husqvarna motors and many other bikes. Thread dia is 26 X...
£9.45 Ex VAT
Add:
Copyright © 2017 Villiers Services. Powered by Zen Cart